The EconoTrace® Parallel Solid Phase Extraction System is an automated
One-Step Extraction and Concentration System is designed to streamline your workflow and increase productivity by automating the manual steps in your sample preparation process. The EconoTrace® Parallel Solid Phase Extraction System uses consistant reproducible positive pressure pumping to replace older manual Liquid-Liquid Extraction techniques, automates existing manual SPE methods and outdated semi-automated instruments.


Applications
Drinking Water
Desalting
Juices

Supports EPA Methods
EPA Method 506  Phthalates and Adipate Esters

EPA Method 508.1 Chlorinated Pesticides, Herbicides, and Organohalides
EPA Method 515.2 Chlorinated Acids
EPA Method 521  Nitrosamines
EPA Method 525.2  Semi-volatiles
EPA Method 526  Semi-volatiles
EPA Method 527 Selected Pesticides and Flame Retardants
EPA Method 528  Phenols
EPA Method 529  Explosives
EPA Method 532  Phenylurea Compounds
EPA Method 535 Chloroacetanilide and other Acetamide Herbicides
EPA Method 548.1  Endothall
EPA Method 549.2  Diquat and Paraquat
EPA Method 550.1  PAH’s
EPA Method 552.1  Haloacetic Acids and Dalapon
EPA Method 553  Benzidines and Nitrogen Containing Pesticides

 

 

 

 

 

 

 

The EconoTrace® Parallel SPE System is designed to streamline your laboratory’s workflow and increase productivity by automating the manual steps in your sample preparation process. The EconoTrace Parallel SPE system automates existing manual SPE techniques and replaces older manual Liquid-Liquid Extraction techniques and outdated semi-automated instruments.

 

The EconoTrace Parallel SPE system  combines extraction, drying and concentration into one step, providing a truly automated total sample prep solution for the laboratory.  Load samples onto the EconoTrace Parallel SPE system and start the automated extraction process. After loading the sample onto the SPE cartridge at the programmed flow rate, the drying step is accomplished using Nitrogen. This drying step replaces manual techniques. The analytes of interest are then eluted directly to the SuperVap Concentrator where the concentration process automatically brings the extract to final volume in an autosampler vial, ready for final analysis.  Automating these processes into one step ensures the highest quality results in the shortest amount of time and eliminates both loss of compounds of interest from human error and the possibility of contamination.

 

Economical
Low Cost System for Drinking Water and Clean Matrices
It is a Modular System that can Expand from 1 to 4 Modules to meet the laboratories needs

Runs 2 Samples in Parallel per Module
Runs up to 8 Samples in Parallel



Reduces Errors and Costs
One-Step Automated SPE and Concentration eliminates human error, saves labor costs and reduces solvent usage while increasing your sample throughput

Eliminates Glassware
Separates Aqueous from Organic Waste

Fully Automated
Hyphenates the entire sample prep process: extraction, drying and concentration steps into a one process.

Runs up to eight samples simultaneously 
Automatic sample bottle rinse
Concentrates samples up to 250ml directly to a GC vial

 
High Speed
The fastest automated Positive Pressure sample processing available for SPE cartridges and columns of all sizesPositive pressure pumping for fast, simultaneous loading of samples
Positive pressure pumping for fast simultaneous loading of samples

Versatile 
Handles a wide range of sample sizes and all matrix types
Sample Sizes 2 mL to 8 L
Expandable from 1 to 4 modules, 2 samples per module
 

Efficient
Uses all SPE cartridge and column sizes
Positive pressure pumping for loading samples
Nitrogen drying 

Compliant
Complies with existing methods that require positive pressure pumping for the precise delivery of sample and solvents
Dispenses up to six solvents using an HPLC pump to deliver precise volumes and flow rates for sample loading, conditioning and elution

Easy Documentation
Programs and stores an unlimited number of methods and runs on an SD Card
Easy method transfer
Easy-to-use touch screen

 

 
Image
Product
PowerPrep Multi-Column Sample Cleanup System 
The PowerPrep Multi-Column Sample Cleanup System is the only automated sample processing system of its kind available today. It is an automated liquid chromatography system that performs simultaneous sample processing unattended. The total sample preparation process; ­sample loading, washing, elution, fraction collection, and concentration is performed automatically.
 
 
SuperVap 12 50 mL Concentrator 
The SuperVap system is an automated, standalone, direct-to-vial concentrator that replaces older techniques such as KD, nitrogen blow down and water baths. By automating what were once manual evaporation and concentration processes, the SuperVap concentration system accelerates your sample throughput, lowers labor costs, and improves the consistency of your results by eliminating the variability inherent in manual sample prep procedures.
 
 
SuperVap 6 250 mL Concentrator 
The SuperVap system is an automated, standalone, direct-to-vial concentrator that replaces older techniques such as KD, nitrogen blow down and water baths. By automating what were once manual evaporation and concentration processes, the SuperVap concentration system accelerates your sample throughput, lowers labor costs, and improves the consistency of your results by eliminating the variability inherent in manual sample prep procedures.
 
 
 
 

Specifications

Dimensions:

15”W x 18”D x 28”H

Weight:

65lbs.

Gas Requirements:         

Nitrogen – 20 PSI minimum

Pump:  

Piston Displacement Flow            

Flow rate: 0.2 to 15ml/minute

Electrical Input:

110/220Volts, 50/60HZ

Controller:

Integrated Touch Screen Control